Analisis Kapabilitas Proses pada Mesin Dryer di Industri Pulp dan Kertas untuk Menghasilkan Produk Sesuai Kualitas yang Ditetapkan
DOI:
https://doi.org/10.25170/jpk.v2i03.6441Keywords:
Dirt Count Pulp, Capability Process, Machine DryerAbstract
This article aims to present one of activities carried out in the factory related to the activity to ensure the capability of Machine Dryer #8, # 9 and #10 PT. Indah Kiat Pulp & Paper produces pulp with a specification of quality surface dirt count < 2,0 mm2/m2 and total dirt count < 5,0 mm2/m2. The capability process method was used in this study. To ensure that the machine has the ability to produce pulp products with surface dirtcount < 2,0 mm2/m2 and total dirt count < 5,0 mm2/m2, CP & CPK values were calculated. If the CP and CPK value are at 1,33 or above, then the machince has the ability to manufacture pupl products with quality surface dirtcount < 2,0 mm2/m2 and quality total dirt count < 5,0 mm2/m2. Based on results, the values of CP and CPK are more than 1,33. Hence, the machine has the ability to produce pulp products with surface dirtcount < 2,0 mm2/m2 and total dirt count < 5,0 mm2/m2.
References
Arciadocono, G & Nuzzi, S. (2017) A Review of Fundamentals on Process Capability, Process Performance, and Process Sigma, and an Introduction to Process Sigma Split. International Journal of Applied Engeneering Research, (12) 14, 4556 – 4570.
Artawidia, I. D. P. A. R., & Handayani, N. U. (2024). Analisis kapabilitas proses produksi pakan udang dengan metode statistical proses control pada PT. CPB. Industrial Engineering Online Journal, 13(1), Jan. 2024.
Korenko, M., Kaplik, P., Bujna, M & Pristavka, M., (2013). Statistical Process Control in Automotive Industry. Acta Technologica Agriculture, (2), 39 – 42.
Kane, V. (1986). Process Capability Indices. Journal of Quality Technology, 18(1), 41-52.
Mahshid, R., Mansourvar, Z., & Hansen, H. N. (2018). Tolerance analysis in manufacturing using process capability ratio with measurement uncertainty. Precision Engineering, 52, 201-210.
Rahmawati, D., Asyari, H., Prasetyawan, A.Y., & Jamaludin, M.A. (2020). Analisis kapabilitas proses pada mesin pengemasan tepung terigu PT. ISM Divisi Bogasari Flour Mills. Teknoin. 26(26)1, 1-13.
Yang, J., Meng, F., Huang, S., & Cui, Y. (2020). Process capability analysis for manufacturing processes based on the truncated data from supplier products. International Journal of Production Research, 58(20). 6235-6251.
