Inspeksi Teknis Re-sertifikasi Peralatan Listrik Pada KegiatanUsaha Minyak dan Gas Bumi
DOI:
https://doi.org/10.25170/jpk.v2i01.6642Keywords:
Technical Inspection, Power Generator, Grounding Value ImprovementAbstract
In the oil and gas industry, technical inspections and safety checks must be conducted on every installation and equipment to ensure safety, security, and reliability of oil and gas operations. The methods or mechanisms used refer to the Decision of the Director of Engineering and Environment of MIGAS No.199.K/HK.02/DMT/2024 regarding the Mechanism for Technical Inspection and Safety Checks. Corrosive cable connections, particularly on grounding cables, can affect grounding values and cause the grounding cables to malfunction. Therefore, regular checks need to be conducted, both physical inspections and grounding value measurements. In addition to technical re-certification inspections, maintenance and regular checks on electrical equipment need to be performed in accordance with legal regulations, technical specifications, and applicable standards, and documentation and storage of the activity reports must be carried out. In operating electrical equipment, it is essential to comply with Safety, Health, Work, and Environmental Protection (K3LL) aspects in every activity, such as the use of personal protective equipment (PPE), like ear protection, which should always be worn when operating a power generator. This is to prevent hearing loss due to the loud noise of the generator.
References
1. Heryana, N. (2023). Power Generator. Modul.
2. International Standard ISO 10816-3. (2009). Part 3: Industrial Machine with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ. International Organization for Standardization.
3. Kementerian ESDM RI Dirjen Migas. (2010). Peraturan Dirjen Migas No.33144.K/06/DJM.S/2010 : Kode Etik Inspektur Minyak dan Gas Bumi. Bab II Kode Etik Pasal 3.
4. Kementerian ESDM. (2021). Peraturan Menteri ESDM RI No.32 tahun 2021 : Inspeksi Teknis Dan Pemeriksaan Keselamatan Instalasi Dan Peralatan Pada Kegiatan Usaha Minyak Dan Gas Bumi. Bab IV Inspeksi Teknis dan Pemeriksaan Keselamatan Pasal 12.
5. Keputusan Direktur Teknik dan Lingkungan Minyak dan Gas Bumi Direktorat Jendral Minyak dan Gas Bumi No. 199.k/HK.02/DMT/2024. (2024). Mekanisme Inspeksi Teknis dan Pemeriksasan Keselamatan.
6. Kementerian Ketenagakerjaan RI. (2018). Peraturan Menteri Ketenagakerjaan Republik Indonesia No. 5 tahun 2018 : Keselamatan dan Kesehatan Kerja Lingkungan. Kementerian Ketenagakerjaan Republik Indonesia. Lampiran 1 Nilai Ambang Batas Faktor Fisika.
7. Standar Nasional Indonesia SNI 04-0225-2000. (2000). Peraturan Umum Instalasi Listrik 2000. Badan Standarisasi Nasional. Sub Bab 3.13.2.8 Persyaratan Penghantar PEN.
8. Standard Operation Procedure No. SOP-OP-012-22. (2022). Electrical Inspection. PT. Nusakura Standarindo. Sub Bab 6.1.2. Pemeriksaan Generator di Lapangan atau Terpasang.
9. Waisapi, J. Y. (2022). Engineering Professionalism. Formosa Journal of Social Sciences (FJSS), 1(3), 299-314.
