Pemodelan dan Simulasi Proses Flash Separation Condensate untuk Optimasi RVP Produk CPF Lapangan-X
DOI:
https://doi.org/10.25170/jpk.v2i04.7007Keywords:
condensate, flash separation, pressure, RVP, TemperatureAbstract
This research aims to optimize flash drum operating conditions at Field-X Central Production Facility (CPF) with a condensate production capacity of 50 barrels per day (bpd). Simulations were conducted using DWSIM software version 8.8.1 with the Peng-Robinson thermodynamic model, varying pressure (5, 10, 15, 20 psig) and temperature (50, 55, 60, 65, 70°C). Simulation results indicate that pressure increases at constant temperature enhance condensate flow rate, while temperature increases reduce RVP values but increase energy requirements. At 5 psig pressure and 50°C temperature, optimal performance was achieved with an RVP of 10.33 psia and an efficiency ratio of 10.30 bpd/kW. However, gravity flow design considerations led to the selection of 10 psig pressure with operating temperatures of 60-65°C. This study provides operational recommendations that balance product specifications, energy efficiency, and system technical constraints.
References
Al-Malah, K. I. M. (2016). Aspen Plus: Chemical Engineering Applications. New York: John Wiley & Sons.
Hasibuan, R., & Permadi, P. (2023). Karakteristik dan penanganan kondensat hidrokarbon pada fasilitas produksi gas. Jurnal Teknologi Migas Indonesia. 35(2), 112-124.
Ibrahim, M., & Sulistyowati, F. (2024). Pengaruh temperatur preheating terhadap stabilitas kondensat hidrokarbon pada proses flash separation. Jurnal Riset Minyak dan Gas. 18(1), 45-59.
Johnson, R., Williams, K., & Thompson, L. (2018). Energy optimization in condensate stabilization processes: A case study. Journal of Process Safety and Environmental Protection. 116, 385-397.
Kidnay, A. J., & Parrish, W. R. (2006). Fundamentals of Natural Gas Processing. Boca Raton: CRC Press.
Ling, K., Wu, X., Guo, B., & He, J. (2019). Integrated Condensate-Stabilization and Flash-Vapor-Recovery Processes. Society of Petroleum Engineers.
Mohammadi, A. H., Asoodeh, M., & Zendehboudi, S. (2017). A comprehensive study on the effects of pressure and temperature on vapor-liquid equilibrium and thermophysical properties of condensate systems. Fuel Processing Technology. 163, 8-19.
Nugroho, A., & Prasetya, H. (2024). Validasi model Peng-Robinson dalam DWSIM untuk simulasi proses stabilisasi kondensat: Perbandingan dengan simulator komersial. Jurnal Teknik Proses. 12(1), 78-91.
Poling, B. E., Prausnitz, J. M., & O'Connell, J. P. (2001). The Properties of Gases and Liquids (5th ed.). McGraw-Hill.
Prasetyo, D., & Juwono, A. (2024). Studi komparatif simulator proses open source dan komersial dalam pemodelan sistem flash separation untuk kondensat. Journal of Chemical Process Engineering. 9(2), 112-125.
Prayitno, T., & Martakusumah, R. (2022). Optimasi penanganan kondensat pada fasilitas produksi gas: Tinjauan aspek teknis dan ekonomis. Jurnal Energi dan Lingkungan. 17(3), 234-248.
Rachman, A., & Sutrisno, B. (2023). Parameter kunci dalam desain flash drum untuk pemisahan kondensat hidrokarbon. Jurnal Teknik Kimia Indonesia, 22(2), 156-169.
Sharma, D., & Kumar, A. (2024). Safety aspects of Reid Vapor Pressure in condensate storage and transportation. Journal of Loss Prevention in the Process Industries. 78, 104698.
Wang, J., Liu, Z., & Chen, G. (2020). Temperature sensitivity of Reid vapor pressure in natural gas condensate stabilization. Journal of Natural Gas Science and Engineering. 83, 103535.
Yang, Y., Zhang, H., Tian, L., & Zhou, J. (2021). Multi-objective optimization of condensate stabilization process considering energy efficiency and product quality. Energy Conversion and Management. 229, 113735.
