Pengadaan Rangka Bangun dan Sistem Kontrol Air Cooler Heat Exchanger di Lapangan Gas Blok A
DOI:
https://doi.org/10.25170/jpk.v3i06.8169Keywords:
ACHE motor gearbox, Fin-fan cooler, ACHE control systemAbstract
The development of the IDI Gas Field in Block A, operated by PT Medco E&P Malaka in East Aceh, faces significant technical challenges due to sour gas reservoir conditions containing high concentrations of H₂S (12,000–16,000 ppm) and CO₂ (27.5%). These corrosive and hazardous conditions require robust engineering solutions to ensure safe and reliable operations. Gas produced from the AS-15 reservoir reaches temperatures of up to 290°F and must be cooled before entering downstream facilities to minimize thermal expansion effects and enable the use of more economical piping materials. This study evaluates the procurement and design verification of the Air Cooler Heat Exchanger (ACHE) package installed at the AS-15 wellpad through a qualitative-descriptive analysis of technical documents, including process design data, HTRI thermal calculations, and mechanical design assessments.
References
API. (2018). Process Instrumentation & Control. API Recommended Practice 554. Washington, D.C.: American Petroleum Institute.
API. (2019). Air Cooled Heat Exchangers for General Refinery Service. API Standard 661, Seventh Edition. Washington, D.C.: American Petroleum Institute.
ASME. (2018a). Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24. ASME B16.5. New York: ASME.
ASME. (2018b). Process Piping. ASME B31.3. New York: ASME.
ASME. (2018c). Welding and Brazing Qualifications. ASME BPVC Section IX. New York: ASME.
ASME. (2019a). Rules for Construction of Pressure Vessels. ASME BPVC Section VIII, Division 1. New York: ASME.
AWS. (2019b). Structural Welding Code – Steel. AWS D1.1/D1.1M. Miami: American Welding Society.
IEC. (2019). Rotating Electrical Machines. IEC 60034. Geneva: International Electrotechnical Commission.
NACE. (2015). Petroleum and Natural Gas Industries – Materials for Use in H2S-Containing Environments. NACE MR0175/ISO 15156. Houston: NACE International.
WRC. (1965). Local Stresses in Spherical and Cylindrical Shells due to External Loadings. WRC Bulletin No. 107. New York: Welding Research Council.
Medco Blok A Malaka (2023). BLA-PH2-DED-M-TS-00-006 Rev 0 Specification for Air Cooled Heat Exchanger AS-15. Project Delivery Onshore
Medco Blok A Malaka (2025). Data Quality Control 1. Hydrostatic Test Report. Project Delivery Onshore (Tidak ada dalam Sitasi)
Medco Blok A Malaka (2025). Data Quality Control 2. Vibration Transmitter Report. Project Delivery Onshore
Medco Blok A Malaka (2025). Data Quality Control 3. Functional Acceptance Test Report. Project Delivery Onshore
Medco Blok A Malaka (2023). BLA-PH2-DED-F-RE-20-505 Rev 0A HAZOP Study Report_AFC. Project Delivery Onshore
Medco Blok A Malaka (2023). BLA-PH2-DED-F-RE-20-504 Rev 0A HAZID Study Report_AFC. Project Delivery Onshore
Medco Blok A Malaka (2023). ARS-PH2-DED-R-PI-20-012 Rev 0 P&ID AS-15 Gas Cooler (REPLACE). Project Delivery Onshore
Medco Blok A Malaka (2023). ARS-PH2-DED-R-PI-20-011 Rev 0A P&ID AS-15 Wellhead and Flowline to Manifold. Project Delivery Onshore
Medco Blok A Malaka (2023). ARS-PH2-DED-M-DS-20-001 Rev 0 Mechanical Datasheet for AS 15 Wellhead Coolers (20-HAL-215 A-B). Project Delivery Onshore
