Implementasi Panel Distribusi Sementara Berbasis RCBO untuk Meningkatkan Keselamatan Kelistrikan pada Kegiatan Maintenance Industri
DOI:
https://doi.org/10.25170/jpk.v3i05.8242Keywords:
RCBO , electrical safety, maintenance, temporary distribution panel, PUIL 2011Abstract
Maintenance activities in industrial areas carry a high electrical risk due to the use of temporary distribution panels and portable electrical equipment. Using an MCB only protects against overcurrent and short circuits, so an RCBO is needed to detect leakage currents that could cause electric shocks. This study aims to analyze the implementation of temporary distribution panels based on RCBO and 5-pole industrial connectors to improve work safety, system reliability, and support the application of PUIL 2011 at PT. Walsin Nickel Industrial Indonesia. The method used is Action Research through observation, hazard identification, risk assessment, and technical testing. The results show that the 30 mA RCBO works well, the output voltage is 400 VAC, and a grounding resistance of 2.3 Ω meets PUIL standards. This implementation enhances electrical safety and reflects engineers' professionalism through engineering judgment and continuous improvement.
References
Ajslev, J., Dastjerdi, E. L., Dyreborg, J., Kines, P., Jeschke, K. C., Sundstrup, E., Jakobsen, M. D., Fallentin, N., & Andersen, L. L. (2017). Safety climate and accidents at work: Cross-sectional study among 15,000 workers of the general working population. Safety Science, 91,320–325. https://doi.org/https://doi.org/10.1016/j.ssci.2016.08.029
Bang, S. Y., Kim, D. H., & Kim, S. C. (2024). Analysis of touch voltage and electric shock risk before and after installation of equipotential bonding in the sewage treatment plants. Journal of Loss Prevention in the Process Industries, 91, 105371. https://doi.org/https://doi.org/10.1016/j.jlp.2024.105371
Billinton, R., & Allan, R. N. (1996). Reliability Evaluation of Power Systems. Springer Nature. https://www.iqytechnicalcollege.com/Reliability Evaluation of Power Systems ( PDFDrive ).pdf . Diakses tanggal 5 Juni 2026.
BSN. (2011). Persyaratan Umum Instalasi Listrik (PUIL) 2011. ( Data Tidak Lengkap)
Creswell, J. W., & Creswell, J. D. (2017). Research Design: Qualitative, Quantitative, and Mixed Methods Approaches: SAGE Publications. (https://books.google.co.id/books?id=KGNADwAAQBAJ). Diakses tanggal 8 Juni 2026.
Gönen, T. (2015). Electric Power Distribution Engineering. CRC Press: Taylor & Francis Group. (https://books.google.co.id/books?id=JIDSBQAAQBAJ). Diakses tanggal 15 Juni 2026.
IEC. (2010). IEC 61009-1:2010 Residual Current Operated Circuit-Breakers with Integral Overcurrent Protection for Household and Similar Uses (RCBOs) – Part 1: General Rules. International Electrotechnical Commission.
IEC. (2012). IEC 60309-1: Plugs, Socket-Outlets and Couplers for Industrial Purposes – Part 1: General Requirements. International Electrotechnical Commission.
IEC. (2019). IEC 60898-1: Electrical Accessories – Circuit-Breakers for Overcurrent Protection for Household and Similar Installations. https://cdn.standards.iteh.ai/samples/20161/6ea162a225a842cdb5446dd0cd668ab8/IEC-60898-1-2015.pdf
IEC. (2024). IEC 61009-1:2024 Residual Current Operated Circuit-Breakers with Integral Overcurrent Protection for Household and Similar Uses (RCBOs) – Part 1: General Rules.
IEC. (2025). IEC 60364-1:2025 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, and definitions (6.0).
IEEE. (2015). IEEE Std 3007.2-2015 Recommended Practice for the Operation and Maintenance of Industrial and Commercial Power Systems. In IEEE Std 3007.2-2015 (pp. 1–56). https://doi.org/10.1109/IEEESTD.2010.5618906
Republik Indonesia. (2014). Undang-undang (UU) No. 11 Tahun 2014 Tentang Keinsinyuran.
ISO. (2018). ISO 45001:2018 Occupational Health and Safety Management Systems – Requirements with Guidance for Use. International Standard, 2018. (https://www.iso.org/obp/ui/en/#iso:std:iso:45001:ed-1:v1:en) .Diakses tanggal 5 Juni 2026.
Jumaedi, J., Kartika, I. I., Triyuliana, C., Widhiantika, W., Darmawan, W., Fitriyastanti, D., Azhari, Y., & Rismaya, A. M. (2025). Analysis of Electrical Inspection and Testing Implementation in Supporting Occupational Safety and Health at PT Cipta Pratama Inspeksi Indonesia. Jurnal Kesehatan Dan Kedokteran, 4(2 SE-Articles), 140–153. https://doi.org/10.56127/jukeke.v4i2.2759
Kusumo, B., & Krisnandi, D. (2023). Analisa Kebocoran Arus Pada Distribusi Listrik Dengansimulasi Penerapan Rcbo Schneider 1 Phasa 6 Amper Padarumah Hunian. Jurnal Elektro, 11(1), 81–95. https://jurnalteknik.unkris.ac.id/index.php/jie/article/view/430/340. Diakses tanggal 15 Juni 2026.
Möller, F., Blanco, A. M., & Meyer, J. (2023). Characteristic leakage current of household devices and their impact on the tripping behaviour of residual current devices. Electric Power Systems Research, 214, 108832. https://doi.org/https://doi.org/10.1016/j.epsr.2022.108832
NFPA. (2024). National Electrical Code NEC ( NFPA 70 ) National Electrical Code (NEC ).
Nurlita, L., & Yuamita, F. (2026). Identifikasi Potensi Bahaya Dalam Aktivitas Pemeliharaan Listrik Dengan Metode HIRARC & FTA Pada PLN ULP Ajibarang. Kampus Akademik Publisingjurnal, Ilmiah Research Student (JIRS), 3(1), 374–385. https://doi.org/10.61722/jirs.v3i1.8664
Nurriwanti, N. S. S., Wahyudiono, Y. D. A., Paskarini, I., & Handayani, A. P. S. (2023). Hazard Identification and Risk Assessment of Sensor Maintenance Work Activity on The Suramadu Bridge Steel Box Girder Area. The Indonesian Journal of Occupational Safety and Health, 12(2 SE-Articles), 227–236. https://doi.org/10.20473/ijosh.v12i2.2023.227-236
Turnip, T. T. A. (2024). Evaluasi Konfigurasi Sistem Koordinasi Proteksi Di PT Smelting Akibat Penambahan Kapasitas Daya PLN Dengan Metode Kurva Arus Waktu. Institut Teknologi Sepuluh Nopember.
Widana, A. K., Wiryajati, I. K., & Adnyani, I. A. S. (2024). Identifikasi Bahaya Dan Penilaian Risiko Keselamatan Dan Kesehatan Kerja Menggunakan Metode Hirarc Pada Gardu Induk Ampenan Arya. Jitet (Jurnal Informatika Dan Teknik Elektro Terapan), 12(3), 4129-4136. https://doi.org/10.23960/jitet.v12i3S1.5272
Wulandari, A., Rendiyansah, & Muharni, Y. (2024). Penerapan Keselamatan dan Kesehatan Kerja di PT. XYZ Menggunakan Metode HIRADC (Hazard Identification, Risk Assessment and Determining Control). Journal of Systems Engineering and Management, 3(1), 45–54. https://doi.org/10.36055/joseam.v3i1.25076
