Penggunaan ETAP 12.6 Sebagai Alat Bantu Dalam Memilih Setting OCR Untuk Melindungi Kelangsungan dan Kestabilan Energi Listrik

Authors

  • Renaldi Hidayat Program Studi Teknik Elektro, Fakultas Teknik Universitas Katolik Atma Jaya Indonesia, Jakarta 12930, Indonesia
  • V. Budi Kartadinata Program Studi Teknik Elektro, Fakultas Teknik Universitas Katolik Atma Jaya Indonesia, Jakarta 12930, Indonesia
  • Catherine Olivia Sereati Program Studi Teknik Elektro, Fakultas Teknik Universitas Katolik Atma Jaya Indonesia, Jakarta 12930, Indonesia
  • Karel Octavianus Bachri Program Studi Teknik Elektro, Fakultas Teknik Universitas Katolik Atma Jaya Indonesia, Jakarta 12930, Indonesia

DOI:

https://doi.org/10.25170/jurnalelektro.v15i2.5112

Keywords:

ETAP 12.6, Protection system, Relay Overcurrent (OCR), Short Circuit

Abstract

In this time electrical energy is one of the most energy used. In industry electrical energy becomes a necessity that cannot be separated from the production process. Due to the need for electrical energy sources, of course, a protection system is needed to maintain the continuity and stability of electrical energy from existing disturbances such as short circuit disturbances. To overcome the short circuit, OCR is used. To assist the process of calculating loadflow and short-circuit current, ETAP12.6 is used. The results of the analysis of the ETAP 12.6 will be compared with the data obtained in the field with the aim of analyzing whether the use of the ETAP 12.6 software in assisting calculations and analysis in the selection of OCR settings. The difference in ocr settings in the ETAP 12.6 and field data has a difference of less than 2%. This difference is relatively small and can still be used to help the process in selecting the OCR settings.

References

M. H. Haikal and M. R. Djalal, "Studi Hubung Singkat 3 Fasa Simetri (Studi Kasus Sistem Interkoneksi 150 kV Sulselrabar)," Conference: Nasread Universitas Darul 'Ulum Jombang, vol. 1, 2014.

N. P. Hisyam, "Perancangan Koordinasi Proteksi Pada Sistem Kelistrikan Di Perencanaan Kapal Cement Carrier," Departemen Teknik Sistem Perkapalan Fakultas Teknlogi Kelautan, 2017.

S. Pandapotan, "Penggunaan ETAP 12.6 Sebagai Software Analisis Power Quality," p. 123–127, 2014.

W. D. Stevenson, Analisis sistem tenaga listrik, Erlangga, 1984.

Aziz, Abdul and I. K. Febriantri, "Analisis Sistem Proteksi Arus Lebih Pada Penyulang Cendana Gardu Induk Bungaran Palembang," Jurnal Ampere, vol. 4, no. 2, pp. 332-344, 2019.

E. D. Pratama, "Studi Perencanaan Koordinasi Proteksi Arus Lebih Pada Sistem Kelistrikan PT. SEMEN Indonesia Pabrik Aceh," Fakultas Teknologi Industri Institut Teknologi Sepuluh Nopember, 2016.

A. P. Purnomo, "Analisis dan Perencanaan Sistem Koordinasi Proteksi Sistem Distribusi Kelistrikan Pada Pelabuhan Teluk Lamong Surabaya," Fakultas Teknik Elektro Institut Teknologi Sepuluh Nopember, 2017.

P. Sinaga, "Evaluasi Koordinasi Sistem Proteksi Pada Sistem Kelistrikan PT. Semen Padang (Persero) Tbk Akibat Adanya Penambahan Pabrik Baru Indarung VI," Institut Teknologi Sepuluh Nopember, 2016.

Downloads

Published

2024-01-15
Abstract views: 26 | PDF downloads: 38